Command:
modem inout
Mode:
Router(config-line)#
Syntax:
modem inout
no modem inout
Syntax Description:
This command has no arguments or keywords.
Command Description:
To configure a line for both incoming and outgoing calls, use the
modem inout line configuration command. Use the no form of this command to disable the line. This command uses DSR and RING signals for carrier detection. The Cisco IOS software does not support any dialing protocols. The host system software or the user must provide any special dialing commands when using the modem for outgoing calls.
Example:
The following example illustrates how to configure a line for both incoming and outgoing calls:
Router(config-line)#modem inout
Misconceptions:
Related Commands:
|